The Beer Runner is an old school board, assembled and ready to take to the boardwalk and campus walkways. As you can see it's a flat ripper with a slight kick.
Specifications:
29"x 7.5" 7-Ply 100% Canadian maple
Trucks: 127mm axle length and 83A bushing
Stella 69MM 78A wheels
1/2" Hard riser pads
ABEC-5 bearings
Now Available
Now Available
Now Available
Carnivores
Herbivores
Rodents
The Cruiser is a fun ride. After a few pushes you're off! The nose and kicktail are nice for ollies up curbs and busting manuals across parking islands. Its shape and size are great for quick, tight turns on crowded sidewalks and it's small enough for carrying and easy storage. The fast momentum and easy portability are perfect for quick commutes through campus.
The Blunt Nose is a more portable and maneuverable version of our classic pintail shape. Our update to a 83A bushing and tighter wheelbase has given it a more responsive ride. If you're looking for a nice carving / cruising board that's also portable, this would be for you.
The Drop Through is made to provide a smooth and stable ride. With the inverted kingpin trucks mounted through the board the center of gravity set lower to the ground minimizing speed wobbles. This is steadily become a favorite of ours since it's a great carving board as much as it is a great downhill board.
Specifications:
40"×10" 9-Ply 100% hard rock Canadian maple
180mm inverted kingpin trucks 83A bushings
Stella 69MM 78A wheels
ABEC-5 speed rated bearings
Blockhead Black / Orange
Blockhead Grey / Green
Ornate Logo
Mainly a downhill board, The Lowrider has a dropped profile for lower center of gravity - easier manueverablity at higher speeds. Subtle concave and hefty 10-ply construction makes this a great board to have in your quiver.
Specifications:
42x9.5" 10-Ply 100% hard rock Canadian maple
180mm inverted kingpin trucks with 83A bushings
Stella 69MM 78A wheels
Abec-5 rated bearings
Now Available
Stingray
Roayl Seal
Overflow
The Bamboo Kicktail has a similar shape The Kicktail but has more flex for that laid back cushioned ride. That's because the 5 plys of maple are sandwiched between the 2 plys of bamboo - hence bamboo kicktail, ya hear?
Specifications:
42 x 9.5" 5-Ply 100% hard rock Canadian maple sandwiched between 2-ply bamboo laminates
These full size longboards are perfect for cruising sessions. It's concave and angled kicktail give this board some good control in tighter situations. Wheel cut-outs allow for loose truck riding without the dreaded wheel bite. Also we've widened the kick slightly from the original and we will be using the 180mm inverted kingpin trucks for all the Kicktail completes.
The Pintails are a full 46" board. Fairly flat board with curved lip concave to towards the edges of the board. You can say it's like The Bluntnoses bigger brother. All updated Pintail completes will be assembled with the 180mm inverted kingpin trucks.
Specifications:
46"×9.75" 7-Ply 100% hard rock Canadian maple
180mm inverted kingpin trucks with 83A bushings
Stella 69MM 78A wheels
Abec-5 rated bearings
Riders have been digging the Stella 69mm wheels on our newest released longboard line and we know they've been waiting for us to release them as components (yes,you there!). These 69's are constructed of super high rebound urethane topped off with a 78a durometer... and you're in pavement heaven.
They have the perfect balance of grip and cushion for your pool or longboard setup. Best of all, you're
getting this all around quality wheel in 6 new colors... you gotsta mix and match, right? Check them out at your local store. These are brand spanking new so if your shop doesn't carry them yet, you're going to have to show them what's up.
all contents and images on this site are the property of SDS Skateboards ™ all rights reserved.
10270 Philadelphia Ct., Rancho Cucamonga CA 91730 US (888) 277-6332
